HomeHome  ChatChat  CalendarCalendar  FAQFAQ  SearchSearch  RegisterRegister  Log inLog in  
Post new topic   Reply to topicBrothers of Briar :: Pipes :: Ye Olde Pipe Rack
 

Here's one I made

View previous topic View next topic Go down 
AuthorMessage
Nick




Joined : 04 Apr 2008
Posts : 72

PostSubject: Here's one I made   Tue Jun 17, 2008 4:11 am
Just wanted to share my latest pipe:






I'd love to hear what you all think.
Back to top Go down
Bulldog Bruce




Age : 55
Joined : 23 Mar 2008
Posts : 208
Location : Pocatello, Idaho

PostSubject: Re: Here's one I made   Tue Jun 17, 2008 10:22 am
Nick, thats cool how the carving flows from the shank into the stem, nice.

Bd Bruce

Never Forget!
Back to top Go down
Winslow




Age : 62
Joined : 11 Apr 2008
Posts : 619
Location : Roselle, IL 60172

PostSubject: Re: Here's one I made   Tue Jun 17, 2008 10:40 am
Nice.Makes me think that someday when I retire I could make pipes and get so good that
I would be on the cover of P&T magazine and develop a following and speak at the big pipe shows
and.........who knows? Laughing Laughing

I wish I could do as well Nick. Smile

Winslow
_________________
"I know, my dear Watson, that you share my love of all that is bizarre and outside the conventions and humdrum routine of everyday life."
Back to top Go down
Nick




Joined : 04 Apr 2008
Posts : 72

PostSubject: Re: Here's one I made   Tue Jun 17, 2008 11:24 am
Winslow wrote:
Nice.Makes me think that someday when I retire I could make pipes and get so good that
I would be on the cover of P&T magazine and develop a following and speak at the big pipe shows
and.........who knows?


Every now and again one of my buddies will tell me i should sell my pipes. I always tell them the same thing. Maybe when I retire. By then, maybe i'll be good enough.
Back to top Go down
jhuggett
BoB's Pioneer & Founding Father



Age : 36
Joined : 09 Dec 2007
Posts : 1739

PostSubject: Re: Here's one I made   Tue Jun 17, 2008 11:28 am
Not bad at all Nick... how does it smoke? Question
_________________
Jason
Back to top Go down
frankluke




Age : 28
Joined : 02 Feb 2008
Posts : 169
Location : Worcester, MA.

PostSubject: Re: Here's one I made   Tue Jun 17, 2008 11:41 am
not bad, i'd smoke it .. i need to try my luck at making my own from a kit, any special tools required?
_________________
Nick


www.stjude.org/donate
Back to top Go down
Carlos
Moderator



Age : 51
Joined : 10 Dec 2007
Posts : 1659
Location : Chestnut, IL

PostSubject: Re: Here's one I made   Tue Jun 17, 2008 11:48 am
frankluke wrote:
not bad, i'd smoke it .. i need to try my luck at making my own from a kit, any special tools required?



If it were me, the special tools would be bandaids.

Laughing
_________________

Rules of Acquisition:

#223. Beware the man who doesn't make time for oo-mox.
Back to top Go down
Nick




Joined : 04 Apr 2008
Posts : 72

PostSubject: Re: Here's one I made   Tue Jun 17, 2008 12:54 pm
Thanks. I made it for my friend, so i really don't know how it smokes.

As far as tools go, all you really need are a few files and a bunch of sand paper. A disk sander will speed things up alot, but it also means you can screw things up 10 times faster. If you get a kit, ask the guy to let you carve your own stem too. Just have him drill and cut a tenon on a rod of vulcanite. The stem is fun and challenging and at least as important as the wood, if not more so. Ohh! A buffer is good too.
Back to top Go down

Here's one I made

View previous topic View next topic Back to top 
Page 1 of 1

Permissions of this forum:You cannot reply to topics in this forum
Brothers of Briar :: Pipes :: Ye Olde Pipe Rack-
Post new topic   Reply to topic