SouthernPiper":26lhx5on said:
OK, so I found ONE that links to an article that more or less compares cake thicknesses, instead of methods to break-in a pipe.
Is breaking in a pipe really necessary? I've heard of several different methods, and the "1/4 increments" method seems the most effective, but i want to enjoy a good long smoke now, not a quarter of a bowls worth a day. It would take forever to get an enjoyable smoke by doing this method.
I guess I'm going to have to get a corn cob for the break in process of my new pipe. or maybe its patience that I need to learn..
I do nothing special during the "break-in." Fill it, smoke it carefully, making sure it doesn't get too hot. Go slow, and all is well. Necessary? Sort of.
Good pipes made from well-seasoned briar will pretty much break in on their own accord. They won't taste terrible in the beginning, and they won't impose too much pain and suffering upon the smoker. Things were not always this way. I suspect that much of the "break-in" legend came about from a time when pipes may not have been made from briar as well cured as what is typically in use today. Sure, some of the more prestigious makers had their curing techniques, but a great many mass-produced pipes were just cut, drilled, shaped and shipped.
Remember, at the high point of the market, factories were turning out millions of pipes each year. Imagine the difficulty curing and aging sufficient briar to have a five year supply on hand. (I've smoked old, unsmoked pipes from some of the "lesser" brands, and some of the horror stories of challenging break-in are well deserved. In one case, the pipe was so dreadful the first bowl, all that was left of it when I finished with it was a chalk outline on the sidewalk.)
Today's pipes, I feel fairly safe in saying, tend to be more consistently and reliably made from good, well-seasoned briar, overall, so the early smoking process is rarely as damaging to the smoker's morale than in those days past when "breaking-in" was often a chore. Today, I actually enjoy the experience of smoking a brand new pipe for the first time. At least, that's my take on it.
Back to methods. For me, a partial bowl never tastes as good as a full bowl. If I only want half a bowl of tobacco, I'd much sooner smoke the top half than a half-bowl. Try it. Very different characteristics. So, I'm disinclined to do the whole 1/3, 2/3, 3/3 thing. (Though, I've certainly tried it.) I've not done any damage to my pipes smoking them slowly from the top to the bottom. Don't pack too tightly, smoke slowly, and if the pipe starts getting hot, let it go out and cool down before re-lighting. Be sure to at least pretend to smoke to the bottom, and you'll be fine.
When you're finished with the bowl, put your thumb over the top, shake the ash, and dump what's left. There should be very little 'dottle," and a fairly dry, consistent ash. Liberal use of pipe cleaners to keep the shank clean and dry, and you're golden.
At least, that's how I do things.