Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Eric Furgeson" data-source="post: 456056" data-attributes="member: 4025"><p>I was playing around with the idea of getting an adapter for one of my 9mm filtered pipes when I hit on the idea of just making my own. I used a small section of 5/16" oak dowel that I bored a draft hole trough langthwise. I than chucked it into a 1/2" drill and sanded it to the proper diamiter to fit snugly into the stem and tennon. I made sure it was cut to the proper langth to allow the stem to seat properly and made sure it had a clear unobstructed draw before running a test bowl. I am happy to say it actually smokes better then before. More even draw, no gurggle, all in all nicer smoke. Just a little time some scrap dowel and you have a better smoking pipe.</p></blockquote><p></p>