hobie1dog
Well-known member
- Joined
- Jun 21, 2010
- Messages
- 1,844
- Reaction score
- 4
I bought this pipe rack/humidor off of Ebay last week. There was another one that had some documentation that it was built around 1890 or so and it was a 6 pipe rack. This one looks like the same manufacturer but who knows what vintage it is.
Has a divot and scratches on the top which will sand out.
Interior panels are all beveled and lift right out.
This is for size reference.
Bottom had a paper layer on it.
Joints are a little rough...gives it character
They didn't bother wiping excess glue off either
So I started sanding on it.
Divot was reduced to a small spot and the scratches came out easily
More sanding...about 4 hours worth
Bottom turned out nicely
These were a bear to sand out.
Has a divot and scratches on the top which will sand out.
Interior panels are all beveled and lift right out.
This is for size reference.
Bottom had a paper layer on it.
Joints are a little rough...gives it character
They didn't bother wiping excess glue off either
So I started sanding on it.
Divot was reduced to a small spot and the scratches came out easily
More sanding...about 4 hours worth
Bottom turned out nicely
These were a bear to sand out.