I think this turned out pretty good. It's just over 6 inches in length or appx 15 cm. The bowl is appx 2 in tall and 7/8's inch wide (inside diameter). Wall thickness at its minimum point is 8.2mm's. Its 46.3 grams.
The pipe is rusticated and while is looks like a panel it is round. The pipe is black with the top and bottom natural. The bamboo is "black" and is not stained. 5/32nds stainless tubing connects the bamboo to the shank and another section at the mouthpiece. The tubing is appx 3/4's an inch long at each end. The stainless steel does not run all the way through the bamboo. This should provide a dry smoke.
The mouth piece is acrylic and is removable. It is pre formed but highly modified. The bit (right in front of the button) is 4.1mm's thick or thin in this case LOL. The button is 6.7mm's thick. Width is 17.3mm's. The airway is 5/32nd's and is tapered and flared out at the button area to provide a nice smooth transition.
The pipe is rusticated and while is looks like a panel it is round. The pipe is black with the top and bottom natural. The bamboo is "black" and is not stained. 5/32nds stainless tubing connects the bamboo to the shank and another section at the mouthpiece. The tubing is appx 3/4's an inch long at each end. The stainless steel does not run all the way through the bamboo. This should provide a dry smoke.
The mouth piece is acrylic and is removable. It is pre formed but highly modified. The bit (right in front of the button) is 4.1mm's thick or thin in this case LOL. The button is 6.7mm's thick. Width is 17.3mm's. The airway is 5/32nd's and is tapered and flared out at the button area to provide a nice smooth transition.